Manual Conversion Kit

BMR Suspension RK002, Manual Steering Conversion Kit, Use with Stock K-members

BMR Suspension RK002, Manual Steering Conversion Kit, Use with Stock K-members
BMR Suspension RK002, Manual Steering Conversion Kit, Use with Stock K-members

BMR Suspension RK002, Manual Steering Conversion Kit, Use with Stock K-members    BMR Suspension RK002, Manual Steering Conversion Kit, Use with Stock K-members

RK002 - Manual Steering Conversion Kit, Use With Stock K-members Only. BMR Suspension components are proudly hand Made In USA by American workers in our manufacturing facility near Tampa, Florida. We cut, bend, notch, drill, weld, mill, powder coat and package all our high quality performance components from American-made DOM and Chrome-Molly steel.

Adding a manual steering rack and reducing weight and parasitic loss on your Fourth Gen GM F-body is easy with a Manual Steering Conversion Kit from BMR Suspension. BMRs manual steering rack conversion kit (RK002) is design for enthusiasts looking to save weight and reduce parasitic power loss by eliminating the factory power steering.

BMR designed the RK002 manual steering conversion kit for street performance and drag race applications. The fourth gen F-body A-arms pivot from a width that is 2-inches wider than the inner tie rod pivot points of a Pinto-style rack and pinion. To compensate for this, BMR provides a custom width rack just for this application.

The rack extension has been biased to the passenger side of the vehicle relocating the steering shaft an inch to the drivers side, allowing for improved header clearance. When performance is a must, rely on BMR Suspension! NOTE, this kit only works with stock K-members. This kit will require drilling of your spindle. It is suggested that a "skinnie" wheel be used to get full adjustment from the bumpsteer kit.

BMR Suspensions RK002 manual steering conversion kit is available in black hammertone and red powdercoat for long lasting good looks. Installation time is about 1-2 hours. Proudly made in the U. Proudly built in the U.

These are available in RED or BLACK HAMMERTONE powder coat. 1993 - 2002 Chevrolet Camaro 1993 - 2002 Pontiac Firebird Please see the "Compatibility" link at the top of the listing. Proudly Made in USA By American Workers!

Hen BMR Suspension began back in 1998, it was difficult for performance automotive enthusiasts to find suspension products that had an innovative design and quality construction at an affordable price. BMR turned this market void into a business philosophy, and has been serving our customer's needs ever since.

In a manufacturing facility near Tampa, Florida, American workers cut, bend, notch, drill, and mill components from American-made DOM and chrome-moly steel. Then, every product is fixture-welded to maintain consistent quality. Workers bead-blast parts and then powdercoat them using BMR's in-house powdercoating line. Finished parts are then assembled and packaged in the assembly department. By manufacturing every product in house, BMR can control the quality at every stage of the manufacturing process.

BMR Suspension products fit and work so well because they are street driven and track tested on BMR project vehicles. Past project cars include a 2005 Mustang drag car, a 2005 Mustang street car, a 2004 GTO, and a 1994 Camaro. BMR's current project vehicles include a 2019 Mustang GT, a 2016 Camaro, a 2016 Challenger Scat Pack, three 2015 Mustang GTs, a 2011 Mustang GT, a 2010 Camaro, and a 1969 Camaro.

As if that were not enough, BMR also has a 2009 G8 GT, a 2008 Trailblazer SS, a 2003 Mach 1 Mustang, a 2000 Grand Prix GTP, a 1998 Camaro, a 1990 Mustang LX, a 1971 Camaro, a 1970 Chevelle, a 1967 Chevelle, and a 1968 GTO. But it is more than just great vehicles-virtually every BMR employee is a racer or hot rodder, as well. This love of racing is demonstrated everyday in BMR's customer service, design innovation, and manufacturing quality. By continuing to push the envelope in product design innovation and manufacturing technology, you can be sure that BMR Suspension will continue to offer the most innovative, quality-oriented, affordable suspension products available. BMR product applications are warranted to be free from defects in material and workmanship under normal use and service for a period of (2) two years from the date of sale to the original purchaser.

BMR product is designed to be used with OEM product and other BMR products. This applies to suspension products from other manufacturers as well as aftermarket exhaust products, aftermarket drivetrain products, and other aftermarket products. The right to make changes in the design or add to or improve on their product without incurring any obligation to install the same on products previously manufactured is expressly reserved. The item "BMR Suspension RK002, Manual Steering Conversion Kit, Use with Stock K-members" is in sale since Thursday, August 14, 2014. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Control Arms & Parts".

The seller is "bmr_suspension_inc" and is located in Seffner, Florida. This item can be shipped worldwide.

  • Country of Manufacture: United States
  • Interchange Part Number: BMR-RK002
  • Manufacturer Part Number: RK002
  • Placement on Vehicle: Front
  • Other Part Number: RK002H, RK002R
  • Brand: BMR Suspension
  • Warranty: Yes


BMR Suspension RK002, Manual Steering Conversion Kit, Use with Stock K-members    BMR Suspension RK002, Manual Steering Conversion Kit, Use with Stock K-members